Genics Inc.
561 Acheson Rd, 53016 Hwy 60
Acheson, AB
T7X 5A7
Tel:
(780)962-1000
Toll Free:
1-877-9-GENICS
Fax:
(780)962-1052

Get Directions To Genics

To obtain the most current MSDS and/or Labels for any Genics product please contact sales.

• COBRA^TMWrap
1. Excavate area around pole and clean wood surface with a wire brush
2. Cut COBRA^TMWrap to desired size
3. Peel off (standard) or slice (SD) the inner layer
4. Wrap tightly around the base of the pole with 2" of the bandage extending above the groundline
5. Replace soil and sod


• COBRA^TMCap
1. Remove the reinspection lid
2. Nail to pole top through the nail slots provided
3. (Optional)Place COBRA^TMRods in compartment
4. Snap the lid closed


• COBRA^TMRod
1. Excavate area around pole to a depth of at least 6"
2. Drill the least diameter possible hole to accommodate pre-determined number and diameter of COBRA^TMRods
3. Insert suitable size and number of rods
4. Seal holes with treated plugs
5. Replace soil and sod


• COBRA^TMShield II
1. Remove vegetation around pole
2. Spray COBRA^TMShield II on pole to a thickness of approximately 1/32" to 1/64"
   (Genics recomends the Graco Ultra Max 490 sprayer with a 17-21 tip)
3. Fill checks and cracks with COBRA^TMShield II product
4. Clean up with soap and water


• Genbor RTU
1. Drill at least three 3/4" holes in a spiral pattern ending above the ant infestation or the decay pocket
2. Fill each hole with approx. 300-400ml of Genbor RTU (a simple garden sprayer may be used)
3. Seal holes with treated plugs